Course catalogue

Presentation 

This training course describes the inclining test and lightweight measurement procedures. Inclining test is a test performed on a ship to determine her stability, lightship weight and the coordinates of her centre of gravity. The test is applied to newly constructed ships greater than 24 metres in length, and to ships altered in ways that could affect stability.

Objectives 

On completion of the training, students will be able to: 

Get familiar with the stability of vessels at sea. 

Know the forces involved in the movement of ships. 

Know the types of inclination and equilibrium. 

Understand how and when to perform an inclining test or lightweight check. 

Know the precautions to be taken to perform or witness such tests

Program

Intact stability 

o Introduction to stability and trim 

o Transverse intact stability 

o Characteristics of GM 

o Free surface effect 

o Trim and stability booklet 

Inclining experiment 

o Test description 

o The general condition of the ship 

o Inclining weights 

o Pendulums 

o Means of communication 

o Documentation 

o Inclining test procedures 

o Acceptance and exemptions 

Lightweight measurement 

o Test description 

o Lightweight measurement procedures 

Precautions to be taken to perform or witness these tests

Certificate 

On completion of the training program, the student will be awarded the following qualifications:

o Certificate of Inclining Test and Lightweight Measurement awarded by Bureau Veritas Solutions Marine & Offshore.

The Certificate of Inclining Test and Lightweight Measurement, issued by Bureau Veritas Solutions Marine & Offshore, is obtained after completing the course and passing the qualification examination. 

Presentation

This training course covers the requirements of SOLAS Convention concerning the safety equipment of cargo ships. It includes the documentation required on board, life-saving appliances, firefighting equipment, the safety of navigation, safety equipment in general and additional requirements for tankers.

Objectives

On completion of the training, students will be able to:

Know the documentation required to be available on board and understand the requirements of the STCW Convention for safe manning crew members. 

Understand the requirements concerning personal life-saving appliances, survival crafts, rescue boats, and launching and recovery arrangements.

Understand the requirements for fire protection, fire detection and fire extinguishing systems, and get familiar with the specific requirements for the carriage of dangerous goods.

Know what are the navigational equipment and appliances required to ensure the safety of navigation and get familiar with other safety equipment required on board.

Understand the additional requirements applicable for tankers and get familiar with inert gas systems

Program

Module 1 – Documentation on Board

Module 2 – Life-Saving Appliances

Module 3 – Fire Fighting Equipment

Module 4 – Safety of Navigation

Module 5 – Safety in General

Module 6 – Additional Requirements for Tankers

Certificate

On completion of the training program, the student will be awarded:

A Certificate of SOLAS Safety Equipment, issued by Bureau Veritas Solutions Marine & Offshore.

The Certificate of SOLAS Safety Equipment is obtained after completing the course and passing the online test.

Presentation

This training course provides an overview of the Radiographic Testing (RT) method for non-destructive examination of materials and welding, its objectives and principles.

Objectives

On completion of the training, students will be able to:

Understand the basic physical principles of radiographic testing.

Know the testing procedure and the inspection process referred to the equipment and films used.

Differentiate applications and the acceptance criteria applied.

Get familiar with the purpose of reference accessories to ensure the image quality and the quality of test performance in general.

Program

History

Basic principle

o Radiation

o Films

o Radiographic image quality

Equipment and testing materials

o Radiation sources

o Film systems

o Image quality indicators

o Film viewing equipment

Testing procedure

o Selection of testing parameters

o Test arrangements

o Film processing

o Film evaluation

Applications and acceptance criteria

o Scope

o Weld inspection

o Indications

o Acceptance criteria

o Test report

Reliability, quality of test results

o Test performance

o Film viewing

o Film examination

o NDT personnel competence

o Safety aspects

Certificate

On completion of the training program, the student will be awarded:

A Certificate of NDT – Radiographic Testing, issued by Bureau Veritas Solutions Marine & Offshore.

The Certificate of NDT – Radiographic Testing is obtained after completion of the course and passing the online test.

The majority of meetings should be discussions that lead to decisions.

 -Patrick Lencioni 

An important part of planning a successful meeting is deciding who should attend the meeting. In the previous course, we have learned that less is more. Invite only those persons who are necessary to achieve the vision and are committed to getting the work completed. Similarly, it is equally important to define and assign specific roles and responsibilities to the team members attending the meeting. This is a critical part of pre-planning. Careful planning ahead of time will result in less resentment, less time wasted, better decisions, and greater ownership of the process by each member of the team.

• State the different roles played in a meeting 

• Determine the roles and responsibilities of a meeting leader

Managers are often called to present to the groups of customers, cross-departmental teams, or in-house decision-makers. The process of crafting and delivering a presentation requires organizational skills, insight, technical abilities, and courage. Public speaking can be intimidating. But, by taking the time to methodically plan and execute the necessary details, you can be prepared and confident to deliver an effective presentation. This course will walk you through the steps you’ll need to plan and organize your topic, choose visual aids, consider technology tools, and practice delivering your speech. 

• Research, decide, and plan your presentation  

• Create a presentation with additional aid   

• Practice and make the presentation

Social scientists have studied and designed leadership theories for decades to understand and explain how great leaders are made. They have compiled lists of leadership traits and constructed frameworks and models to illustrate the leadership phenomenon. And while these theories are detailed, thoroughly researched, and insightful, none provide “the” singular leadership model that works for every high-level manager aspiring to lead their team effectively and successfully.

What they do provide is an abundant source of leadership data that can be used to create your own flexible brand of leadership. Leaders face a wide range of tasks, responsibilities, and challenges—both anticipated and unexpected—every day.

Assembling a toolkit of leadership options that can address them is something smart leaders do. Let’s study the specifics of some core leadership theories and how you might use them in different business scenarios.

• Identify the Traits and Contingency theories

• Describe the Behavioral theory

• Explain the Transformational Leadership theory

Organizations are changing, and so are our offices. The new age millennials are shifting toward the virtual world. More and more organizations use virtual teams to meet corporate goals. This has created the need to determine how best to manage and lead these virtual groups. 

Traditional methods of managing on-site groups don’t work with remote workers, because virtual teams are most often composed of workers who are spread over a varied geographic and cultural expanse and communicate, for the most part, electronically. Future Workforce Report states that 63 percent of companies utilize virtual workers, but only 57 percent have standards in place to manage the process. 

In this lesson, you will learn to effectively guide teams that they rarely see face-to-face.

• Establish requirements 

• Build mutual trust with your virtual team 

• Communicate frequently with them

Leadership education is an ongoing process. Your success will increase when you invest time in studying leadership models and characteristics, reading about great leaders, putting your knowledge into practice, and then evaluating the results. It takes different skills and abilities to successfully lead small and large teams. In this course, you will get familiarized with many advantages and disadvantages, as well as the best practices to be adopted to lead small and large teams successfully.

• Identify the strengths and challenges of large and small groups

• Examine the best practices for leading small teams

• Examine the best practices for leading large teams

Over 50 years ago, a social psychologist Douglas McGregor of MIT published a book outlining his research of two contrasting management styles: Theory X and Theory Y.  

He argued that Theory X, based on hierarchy and power, was an outdated authoritarian “top-down” way of managing people. Theory Y, he proposed, was an improved, alternative method of management, one that was more participative and synergistic.

• Define Theory X and Y management styles 

• Describe Theory X and Y from the management’s and worker’s perspective 

• Differentiate between Theory X and Theory Y managerial styles

Only in Norwegian

Etter gjennomført opplæring skal deltagerne ha kunnskaper og ferdigheter i å reagere og handle ved alarm, samt følge nødprosedyrer. Sikre effektiv evakuering av fartøyet og ivareta passasjerer og mannskap i en evakueringssituasjon.

Kursinnhold er i henhold til STCW-95, tabell A-V/2 og A-V/3.

Kursinnhold
- Organisere nødprosedyrer om bord 
- Skipets konstruksjon med muligheter og begrensninger 
- Beredskapsplaner og nødprosedyrer 
- Optimalisere bruk av ressurser 
- Ressursutnyttelse / øvelsemønstre 
- Styre tiltakene i en nødsituasjon 
- Organisasjon 
- Ledelse 
- Kommunikasjon 
- Håndtering av passasjerer og annet personell i nødsituasjoner 
- Bevissthet om allmenne reaksjonsmønstre 
- Etablere og opprettholde effektiv kommunikasjon 
- Betydningen av å etablere og opprettholde effektiv kommunikasjon 
- Praktiske øvelser 
- Gruppeoppgaver 
- Veiledning og instruksjon under vanskelige forhold

After completing the course, the students should be able to take part in their own organisation’s emergency management and be familiar with emergency preparedness in the petroleum industry.

Course Content

Lectures and simulation/practical exercises and drills within:

- Emergency preparedness organisation

- Efficient management of an emergency situation

- Cooperation – roles and responsibilities

- Mental reactions and stress management

- Emergency room conduct – practical training

This course is valid for 24 months.

This is a course for electrical installations in potentially explosive areas.

Our goal is to make sure that employees are motivated to work safely and securely.   

Topics:

• General principles for explosion protection

• Area classification and zone division

• Gas groups and the connection between area and equipment

• Temperature classes and the connection between area and equipment

• The general principles for type of protection and labeling

Standards:

• NEK 420

• IEC / NEK EN 60079-10-1

• IEC / NEK EN 60079-14

This course is only available in Norwegian.

Basic first aid for the wind industry.

Upon completion of the Global Wind Organization (GWO) Basic Safety Training (BST), delegates will have awareness of the dangers that arise when working in the wind industry and how to control and reduce these dangers.

The course covers the requirements for training of personnel and refresher courses both onshore and offshore wind in accordance with:

- Global Wind Organization (GWO)

 - Labor Inspection (Regulations)

Competence for "First Aid" must be maintained in accordance with. guideline in the GWO standard. It shall be conducted refresher training every 2 years.

Norwegian only

Dette kurset vil gi fremtidige kranførere en god teoretisk grunnopplæring i sikker bruk av offshorekran. Opplæringen gir kandidatene god innsikt i prinsippene for offshorekraners konstruksjon, virkemåte, vedlikehold og bruk slik at uhell og ulykker i forbindelse med løfteoperasjoner unngås. Opplæringen dekker den teoretiske sikkerhetsopplæringen som kreves for G5 offshorekran, samt G20 fastmontert hydraulisk kran. Kurset avsluttes med en skriftlig teoretisk prøve. Når opplært person har bestått teoretisk prøve, samt eksamen for anhukere med tillegg av praktisk kjøreprøve på offshorekran, vil dette være grunnlag for utstedelse av kompetansebevis for fører av G5 offshorekran.

Kursinnhold:

- Innledning med definisjon på offshorekran

- Bruksområder for offshorekraner, fastmonterte hydrauliske kraner

- Ulykker med offshorekraner

- Lover og forskrifter vedr. offshorekraner 

- Krav til kranfører

- Oppbygging, konstruksjon og montering av forskjellige typer offshorekraner

- Fundament / pidestall

- Bomkonstruksjoner

- Elektrisk anlegg

- Hydraulikk / elektronikk

- Mekanikk

- Lastdiagram

- Sikkerhets- / overlastutstyr

- Vinsj / Ståltau / blokk 

- Kontroll og vedlikehold

- Sertifisering / dokumentasjon

- Sikker bruk av offshorekraner

- Øvingsoppgaver og eksamen

This course is only available in Norwegian.

Kurset vil gi kranoperatører en god teoretisk grunnopplæring på bro og traverskraner slik at uhell og ulykker i forbindelse med løfteoparsjoner unngås. Opplæringen gir kandidatene god innsikt i prinsippene for traverskraners konstruksjon,virkemåte, vedlikehold og bruk. Ved bestått teoretisk og praktisk prøve, vil det gi grunnlag for utstedelse av kompetansebevis G4 Bro-og traverskraner.

Kursinnhold
- G11 Stropp og anhuker opplæring (se KOL-001)
- Innledning med krav til kranførerer
- Bruksområder for traverskraner
- Ulykker med bro- og traverskraner
- Oppbygging av forskjellige typer bro- og traverskraner
- Elektrisk anlegg på bro- og traverskraner
- Sikkerhetsbrytere
- Ståltau / blokk
- Sertifisering / dokumentasjon
- Kontroll og vedlikehold, sikkerhetsregler ved bruk

- Øvingsoppgaver 

- Eksamen

Modul 1.1 (8 timer) Arbeidsmiljø, ansvar og konsekvenser

Modul 2.3 (16 timer) G11- Løfteredskap 

Modul 2.7 (16 timer) G4- Bro- og Traverskran 

Modul 3.7 - G4 (8 timer) Praktisk bruk

This course is only available in Norwegian.

When writing business emails, letters, memos, and other communications, it’s important to check for any grammar or spelling errors that can distract from your message. Misspelled words and grammatical errors are easy to fix if you make a habit of using the spellcheck and grammar features on your computer. In this course, we will review basic punctuation rules. We will examine some common sentence structure mistakes. And we’ll study some common word choice errors. Finally, we’ll provide a list of online resources and books. Don’t let grammar and word choice errors blur your message or damage your credibility.

• Use appropriate punctuations    

• Improve your sentence structure    

• Identify the common mistakes in word usage

People generally do business with people they like or look up to, and not just with a company. This means that successful leaders build their personal brand, resulting in the achievement of organizational goals. A personal brand can elevate you above the crowd and help you achieve your personal and professional goals. It is a constant and ever-changing process of identifying your goals, setting up a plan, and monitoring it consistently. Your brand is a combination of the skills you develop and the behavior you display. In this course, you will look at the traits of building a successful personal brand.

• Define personal brand

• Enlist strategy to build a personal brand

• State the steps to build a successful personal brand

Objective: The training is intended to provide personnel with good theoretical and practical basic training in the use and maintenance of steel ropes.

The course provides a thorough introduction to knowledge about steel ropes, the correct use / choice of steel ropes and what requirements are set for those who use and control steel ropes.

Regulations on the performance of work, use of work equipment and associated technical requirements (regulations on the performance of work) §10-1. Requirement for documented safety training for work equipment that requires special care during use 

When an employer after a risk assessment finds that the work equipment requires special care during use, only employees who have documented safety training according to §10-2 §10-2 can be used. Requirements for documented safety training when using work equipment

Anyone who is to use work equipment as mentioned in §10-1 and §10-3, must have practical and theoretical training that provides knowledge of construction, operation, use properties and area of use, as well as maintenance and control.

Content:

- Basic theory of steel ropes
- Construction
- Properties
- End parties
- Cast blocks / Wire discs
- The right choice of wire rope
- Proper use of wire ropes
- Proper winding and running in of steel ropes
- Maintenance of steel ropes
- Lubrication of steel ropes
- Damage to steel ropes
- Disposal rules
- Checking of wire ropes in accordance with standard ISO-4309
- Exam

In this lesson, you will learn how a culture of learning leads to success. Establishing a culture of continuous learning in your organization takes time and effort, but the results are worth the investment.    

Begin with gaining the support of executives, and then start to incorporate learning into your overall mission, your strategic goals, and value statements.   

Work to get “buy-in” from everyone in your company, and include them in finding ways to learn, teach, and share knowledge.   

Establish easy-to-use systems and processes that make learning an expected part of your corporate behavior.    

Your organization and employees will benefit not only through increased productivity and higher profits, but in personal development and job satisfaction as well. 

• Describe a continuous learning organization     

• List the benefits of a continuous learning organization    

• Build a culture of continuous learning

Standard NS-EN 1591-4 sets requirements for maintenance of competence. If there has been a stay with work on flanged connections for six months or more, a new refresher course must be completed in order to continue to have valid approval. We offer a separate course for those who do not get enough practice (within 6 months) to maintain the approval. The aim is to provide the participant with sufficient theory and practice to continue to be able to perform flange work in accordance with current requirements. The course includes: Flanges, Clamps, Bolts and lubrication, Gaskets, Working procedures, Understanding safe use of tools and equipment, Associated documents