Course catalogue

Do you want to mentor an environment of innovative thinking in your organization? A leader needs to have some qualities to promote innovative thinking among their team members. The leader also needs to know the techniques of exercising innovation. This lesson outlines the qualities and techniques as well as the four-step process of leading innovation sessions. You can also learn various strategies to maintain the environment of innovation in your organization. It encourages you to challenge your processes and think out of the box. This is a must-learn lesson for persons who want to lead innovation teams effectively.

• Describe an ideal change leader and team members

• Explain the techniques of exercising innovation

• Describe the four-step process of leading innovation sessions

EXAM OBJECTIVES

This exam tests the skills and competence of a DPO against the requirements given in the competence standard DNV-GL Notation AJ/FT-AT.

The exam is a thorough test, covering the most important competences for a DPO, in compliance with relevant DNVGL competence standards. The test measures how well operation of equipment, duties and tasks are performed, all in compliance with relevant international, national and local regulations and requirements.

EXAM AND CERTIFICATION PROCESS

The test center will upon receipt of the application formsend a notification containing the following:

• Exam date and time
• Exam place and Terms & conditions
• Recertification requirements
• DNV GL standard for certification ST-0023
• Standard for certification 0032, Appendix A: Examination regulations
• Time schedule for examination

SPECIAL INFORMATION

• DNV GL Standard for certification ST-0032 - Test centre for certification of personnel
• DNV GL standard for certification ST-0033 - Maritime simulator systems
• DNV GL standard for certification ST-0023 - Competence of Dynamic Positioning Operators

CERTIFICATE

A DNV GL DPO certificate will be issued upon successful completion of the exam.

LEARNING OBJECTIVES

The Offshore loading courses are designed to meet  Equinor, OGUK and company specific requirements for training of shuttle tanker personnel. The objective is to achieve optimal skills and understanding on how to handle a shuttle tanker in DP mode. The participants will use previously acquired knowledge on manual handling and basic DP together with updated advanced DP knowledge during training on Shuttle tanker operational procedures.

The course focuses on handling Shuttle Tankers in close proximity to Floating Production Storage and Off take units (FPSO’s/FSU’s), Offshore Loading systems (OLS), Single Anchor Loading (SAL) and Direct Shuttle Loading (DSL) from various FPSO’s.

CONTENT

Discussions on unwanted incidents
• Contingency situation scenarios
• Gain thorough understanding of:
- The DP system’s possibilities and limitations
- Offshore Loading procedures for various fields
- Correct use of Position Reference systems
- Requirements and guidelines that applies for
- Shuttle Tanker DPO’s

LEARNING PROCESS

All approaches to the loading buoys are carried out by using Dynamic Positioning Systems, according to procedures. Simulations also include reconstruction of known DP incidents involving shuttle tankers. The complexity of these exercises will be based on the experience of the person “in charge” on the bridge.

SPECIAL INFORMATION

References:
• Equinor Competence Requirements for Shuttle Tanker Personnel, WR 239
• OGUK Tandem Loading Guidelines Volume 1
• Teekay Competence Requirements, SP 0961
• Various operational procedures

CERTIFICATE

Certification of attendance will be issued on successful completion of the course.

LEARNING OBJECTIVES

The course aim to give knowledge, understanding and practical skills within:
• Operations
• Forces
• Communication
• Planning

CONTENT

• Safety functions
• Start / stop procedures
• Operational limitations of crane operations
• Communication during crane operations
• Preparation and planning of crane operations
• Internal transport on the installation
• Loading and unloading supply vessels
• Crane operation on various fixed and floating installations

LEARNING PROCESS

The purpose of this course is to give operators and others involved in lifting operations the basic knowledge, understanding and skills.

This is achieved through an in-depth period of training on a full-scale DNV GL Class A crane simulator, supported by a program of lectures and instruction.

Study will cover dierent types of loads and external forces affecting the load on crane and boat.

SPECIAL INFORMATION

References: NORSOK R003

The course can be adjusted to suit company specific needs regarding the choice of unloading/loading procedures.

CERTIFICATE

Certification of attendance will be issued upon successful completion of the course.

Sales effectiveness is the process of identifying and utilizing the right sales activities to generate the best sales outcomes. Your definition of a successful sale will depend upon your product, service, corporate goals, and objectives. Companies measure their effectiveness in a variety of ways: increased profit, new product sales, or shortened sales cycle. Successful sales organizations share a commitment to defining, measuring, and optimizing all of the components of their sales process in order to consistently achieve strategic goals. 

• Build an effective sales process   

• Measure your sales process  

• Practice the customer-centric sales approach

The virtual interview can be a challenging and difficult process if you don’t prepare properly. You may face many challenges, such as technological, ambience related issues. However, to convene a successful interview, it is important to how to overcome these challenges. Branding your company is also one the challenges you may face when conducting virtual interview. Home setup throws various set of challenges, which one must overcome to have successful virtual interview. In this course, you will learn to overcome the challenges faced in conducting a successful virtual interview. 

• Identify the requisites of a pre-interview process

• List best practices while conducting interview virtually

• Identify post interview actionable

LEARNING OBJECTIVES

This course aim to provide Navigators on Shuttle Tankers knowledge and skills to be a certified DPO in offshore Loading Operations.

By the end of the course the students should have:

• Acquired a thorough knowledge of the various type of Offloading Operations, i.e. OLS (Offshore Loading System), SAL (Single Anchor Loading), Tandem loading from FPSO’s and FSU’s and DSL (Direct Shuttle Loading)
• The capability to operate the DP System in various
• modes associated with offshore loading operations; i.e. Joystick, Auto Pos, Approach, Weather Wane
• The ability to carry out any Offshore Loading Operation according to field procedures, guidelines and to best practice.
• The ability to react correctly to any unforeseen DP incident in order to avoid a disaster

CONTENT

• Simulator exercises
• Briefing and de-briefing of a variety of relevant exercises according to the actual field procedures
• Shuttle Tanker competence and training requirements
• Basic Human Factors

LEARNING PROCESS

All Offshore Loading exercises will be carried out on a Full Scale Visual DNV GL Approved DP Class A simulator, being able to simulate all types of operation listed as learning objectives.

SPECIAL INFORMATION

References:
• DNV GL, Standard for Certification no. 0023
• DNV GL, Standard for Certification no. 0008
• DNV GL, RP-0007

CERTIFICATE

Certification of attendance will be issued upon successful completion of the course.

With COVID-19 meaning that home working is no longer an option but a necessity for many, what are the potential side effects on our health and work performance. Employers may need to provide additional training to ensure appropriate supervision and work behaviours. These include remote technology, communication skills development, time management and ergonomics.

Managing remote teams and business continuity are operational priorities for companies during the COVID-19 pandemic.  Remote working allows some operations to continue and facilitate flexible work schedules, which typically improves individual performance. However, greater flexibility and leading teams remotely puts a greater burden on managers and makes supervision more complex. 

The group of workers who experience most difficulty in handling ‘boundary-less’ working are actually managers.  This is mainly because they are connected longer in their ‘non-working time’.

The ‘Managing Remote Teams’ bundle includes 3 months access to 10 online courses and over 10 hours of eLearning. 

• Negativity in the Workplace

• Decision Making

• Supporting Change: 03-Your Path to Supporting Change

• Management 101: 02-Leading and Communicating as a Manager

• Smart Management: Managing a Geographically Distributed Workforce

• Health and Safety for Home Workers (Managers)

• Lone Working (Managers)

• An Effective Leader’s Guide to Time Management

• Team Building IV: Conflict Management

• Essential Skills of Leadership: 05-Lead Effective Meetings

Objective: Through a combination of theory and practical training, this course provides participants with the necessary knowledge and skills required to work safely in enclosed spaces.

The Norwegian Labor Inspection Authority has made major changes to the regulations. People who work in tanks and closed rooms are the biggest difference that the regulation "Work in tanks" has fallen away. This is replaced by section 29 of the regulations «execution of work», which states that all work in closed rooms shall be performed «without danger to life or health». A simple requirement that gives the employer a great deal of responsibility.

New SOLAS requirements: Exercises in closed rooms and rescue, as well as portable gas measuring equipment.

Applies to: All ships covered by SOLAS and all high-speed vessels, mobile offshore drilling units and dynamically positioned vessels

Our courses are in accordance with SOLAS-IMO requirements and the Norwegian Labor Inspection Authority - Execution of work

The definitions of a cramped space vary from country to country, but the usual criteria usually include:

- A room that is predominantly or completely closed
- Contains health and / or safety hazards
- Is not designed for continuous stay of employees
- Has entrances or exits that are small or difficult to access
- A room that is large enough that you can enter it completely and perform the work tasks you have been assigned
- Limited air circulation

Content:

- Review of public laws and regulations
- Know which constituents a safe breathing air contains
- How to make a gas measurement before entering
- Plan entry jobs and rescue operations in closed rooms
- Equipment knowledge
- Exercises in our training tank. We practice entry and use of fall protection equipment, rescue equipment, breathing air equipment and gas meter

A dream doesn't become reality through magic; it takes sweat, determination and hard work.

 -Colin Powell 

A new methodology for innovation, “Trystorming” is a combination of “Brainstorming” and “Trying” something practically. This lesson highlights the difference between brainstorming and trystorming, and provides the guidelines for where and when it can be used. Trystorming is a practical approach to innovating by focusing on practically trying or experimenting within reasonable limits to understand the efficacy of an idea before implementing it fully. Take this lesson to pick up the basics of trystorming and lead innovations in your organization.

• Explain what is trystorming 

• Know the difference between trystorming and brainstorming 

• Describe the guidelines for trystorming and where it can be used

Objective: The main goal is to provide personnel who are to perform the roles of signal transmitter, signalers and deck operator with sufficient knowledge of handling and transport of dangerous goods and hazardous waste, to be able to identify hazards and risks when handling this type of cargo, in such a way that unwanted incidents are avoided.

Safe handling and transport of dangerous goods and hazardous waste requires knowledge of hazards and risks, regulations, correct execution and safe practice during treatment and transport.

Content:

The learning process leading up to a certificate of competence is carried out to contribute to safe lifting operations, as well as to document the necessary knowledge and skills in accordance with requirements laid down in national regulations and standards.

After completion, participants must be able to identify hazards, risks, causes and consequences of accidents with dangerous goods and hazardous waste.

Participants will also be familiar with restrictions, requirements, classifications, identification, packaging, marking, documentation and handling of dangerous goods and waste.

Hytorc provide fundamental courses in flange work.
An important aspect of our operation is rooted in courses and training in flange work and bolted connections. We have been involved in the development of courses since OLF started their Gasslekasjeprosjekt (Gas-leakage project) in 2003, up until the updated requirements per NS-EN 1591-4 as of today.

Content:

The industries requirements in regards to training has provided improvements in the form of decrease in amounts of leakages both offshore and onshore. The executive operator gains better understanding and enhanced competence which further results in a safer work environment.

The fundamental course in flange work spans over 4 days, covering both theoretical- and practical training. Examination on both the theoretical and practical work will be conducted. Upon successful completion of the exams, a course certificate will be awarded. This certificate is valid for 5 years. To extend the validation of the certificate, a one-day refresher course must be completed before the expiration date of the certificate (within 5 years).
The refresher course prolongs the validity of the certificate for another 5 years upon completion.

The primary goal of the course is to provide necessary and required training which enables the individual to conduct independent work on flanges and bolted connections.

The course offers the attendees fundamental knowledge, inter alia:

-          Flanges

-          Clamps

-          Bolts and lubrication

-          Gaskets

-          Work Procedures

-          Understanding and safe use of hydraulic tools, torque wrench and equipment

-          Associated documents

The course is set up on request.

Presentation

This training course provides an overview of the Radiographic Testing (RT) method for non-destructive examination of materials and welding, its objectives and principles.

Objectives

On completion of the training, students will be able to:

Understand the basic physical principles of radiographic testing.

Know the testing procedure and the inspection process referred to the equipment and films used.

Differentiate applications and the acceptance criteria applied.

Get familiar with the purpose of reference accessories to ensure the image quality and the quality of test performance in general.

Program

History

Basic principle

o Radiation

o Films

o Radiographic image quality

Equipment and testing materials

o Radiation sources

o Film systems

o Image quality indicators

o Film viewing equipment

Testing procedure

o Selection of testing parameters

o Test arrangements

o Film processing

o Film evaluation

Applications and acceptance criteria

o Scope

o Weld inspection

o Indications

o Acceptance criteria

o Test report

Reliability, quality of test results

o Test performance

o Film viewing

o Film examination

o NDT personnel competence

o Safety aspects

Certificate

On completion of the training program, the student will be awarded:

A Certificate of NDT – Radiographic Testing, issued by Bureau Veritas Solutions Marine & Offshore.

The Certificate of NDT – Radiographic Testing is obtained after completion of the course and passing the online test.

Presentation 

This training course describes the inclining test and lightweight measurement procedures. Inclining test is a test performed on a ship to determine her stability, lightship weight and the coordinates of her centre of gravity. The test is applied to newly constructed ships greater than 24 metres in length, and to ships altered in ways that could affect stability.

Objectives 

On completion of the training, students will be able to: 

Get familiar with the stability of vessels at sea. 

Know the forces involved in the movement of ships. 

Know the types of inclination and equilibrium. 

Understand how and when to perform an inclining test or lightweight check. 

Know the precautions to be taken to perform or witness such tests

Program

Intact stability 

o Introduction to stability and trim 

o Transverse intact stability 

o Characteristics of GM 

o Free surface effect 

o Trim and stability booklet 

Inclining experiment 

o Test description 

o The general condition of the ship 

o Inclining weights 

o Pendulums 

o Means of communication 

o Documentation 

o Inclining test procedures 

o Acceptance and exemptions 

Lightweight measurement 

o Test description 

o Lightweight measurement procedures 

Precautions to be taken to perform or witness these tests

Certificate 

On completion of the training program, the student will be awarded the following qualifications:

o Certificate of Inclining Test and Lightweight Measurement awarded by Bureau Veritas Solutions Marine & Offshore.

The Certificate of Inclining Test and Lightweight Measurement, issued by Bureau Veritas Solutions Marine & Offshore, is obtained after completing the course and passing the qualification examination. 

Presentation

This training course covers the requirements of SOLAS Convention concerning the safety equipment of cargo ships. It includes the documentation required on board, life-saving appliances, firefighting equipment, the safety of navigation, safety equipment in general and additional requirements for tankers.

Objectives

On completion of the training, students will be able to:

Know the documentation required to be available on board and understand the requirements of the STCW Convention for safe manning crew members. 

Understand the requirements concerning personal life-saving appliances, survival crafts, rescue boats, and launching and recovery arrangements.

Understand the requirements for fire protection, fire detection and fire extinguishing systems, and get familiar with the specific requirements for the carriage of dangerous goods.

Know what are the navigational equipment and appliances required to ensure the safety of navigation and get familiar with other safety equipment required on board.

Understand the additional requirements applicable for tankers and get familiar with inert gas systems

Program

Module 1 – Documentation on Board

Module 2 – Life-Saving Appliances

Module 3 – Fire Fighting Equipment

Module 4 – Safety of Navigation

Module 5 – Safety in General

Module 6 – Additional Requirements for Tankers

Certificate

On completion of the training program, the student will be awarded:

A Certificate of SOLAS Safety Equipment, issued by Bureau Veritas Solutions Marine & Offshore.

The Certificate of SOLAS Safety Equipment is obtained after completing the course and passing the online test.

Oppgradering fra Norsk Olje og Gass til IMO50 for personell som innehar Grunnleggende sikkerhetskurs for Norsk Olje og Gass (Offshore).

Kurset oppgrader personell med Grunnleggende sikkerhetskurs for Norsk Olje og Gass (Offshore) til STCW Grunnleggende sikkerhetsopplæring for sjøfolk. Kurset inneholder brannvern, røykdykking, brannslokking, sjøredning, grunnleggende førstehjelp og personlig sikkerhet og omsorg for menneskeliv og miljø. Kurset er godkjent etter IMO regelverket og gjelder hele verden.

How much time do you spend developing your leadership succession plan? As older leaders begin to retire at greater rates, the 2018 Deloitte Millennial Survey discovered that 65% of potential millennial leaders feel unprepared to take their places. Forbes reports that by 2025, 75% of the workforce will be made up of millennials. These statistics suggest that there’s a leadership crisis on the horizon. Designing a strategy and framework to direct leadership development is mission critical for every organization. Training—and retaining —emerging leaders in your company should be a top priority. Understanding what team members want and expect from an employer will help you develop the right programs and systems to keep your talent engaged in learning, growing, and contributing to your organization.

• Retain your talented resource   

• Design a leadership development framework   

• Create a culture of learning

The course "Hose assembly – safe appliances" provides a basic introduction to the safe use of hoses and selection of fittings for different applications. Furthermore, the course focuses on the identification of fittings, as well as basic practical training in hose assembly.

After the course, participants will be able to use the hose assembly equipment in a way that maintains a safe and appropriate work process. The course is divided into a theoretical and a practical part and is concluded with a written certification test. The course is conducted according to the standard TR 1803 and Oil and Gas United Kingdom Standard.

Focus on production and processing. Upon completion of this course, participants should be able to give an account of the production process of oil and gas. They should be able to identify platform equipment, state the position, and, in principle, give an account of the workings of the production and process equipment involved.

Course Content 

Introduction:

What is produced?

- Liquids

- Gases

The production well:

The Christmas tree

The production process, main and auxiliary equipment

- Well head

- Production manifold

- Inlet separator/water separator

- De-gassing tanks

- Liquid separators

- Suction brushes

- Gas Brushes

- Compressors

- Coalescer

- Flare boom - Coolers/heat exchangers

- Pumps

- Filters

- Valves

The production process, main and auxiliary equipment, cont.:

- Measuring apparatus

- Water machines - electric boilers

- Gas treatment equipment

- Separators for gas/condensate

- Storage tanks and equipment

- Re-injection manifold

- Safety and surveillance systems

- Help systems

Production methods:

- Primary extraction

- Secondary extraction (gas/water injection)

Future production systems:

- Underwater/satellite system

The course can also be arranged internally and can be tailor-made for individual companies.

Only in Norwegian

Kurset gir kursdeltakerne kunnskap om ARL's funksjon og rolle, effektiv kommunikasjon, innholdet i situasjonsrapporter og observasjonsteknikker. Deltakerne lærer også hvordan man slokker mindre branntilløp, samt å utføre livreddende førstehjelp.

Kurset er i hovedsak basert på praktiske øvelser i slukking av brann, bruk av utstyr, slukkemetoder og førstehjelp.

Kursinnhold

Brann:
- Funksjon og rolle 
- Observasjonsteknikk 
- Kommunikasjon 
- Situasjonsrapport
- Slokking av branntilløp med håndslokkemateriell 
- Barrierer (tekniske, menneskelige og organisatoriske)

Førstehjelp:
- Sirkulasjon / blødninger 
- Hjerte- og lungeredning 
- Brannskader 
- Stans av blødninger
- Hode-, nakke- og ryggskader 
- Transport av skadde 
- Førstehjelp, nye momenter

Etter endt undervisning skal kursdeltakerne:
- Kjenne til ARL's funksjon og rolle
- Kunne etablere effektiv kommunikasjon 
- Kjenne til innholdet i en situasjonsrapport 
- Effektivt kunne slokke et mindre branntilløp med en håndslokkemateriell 
- Kjenne til observasjonsteknikker 
- Kunne utføre livreddende førstehjelp