Course catalogue

ISM-koden (International safety management code – A.741(18)) er en internasjonal sikkerhetsstyringsstandard for drift av fartøy (flyttbare installasjoner til sjøs) og hindring av forurensing. Tolv år etter at ISM koden ble obligatorisk, gjennomførte IMO den første revideringen (gjennomgang) av koden. Endringene ble gjort gjeldende fra og med juli 2010. Den siste “oppdateringen” (forandringer) av ISM koden (2014) er gjeldende fra og med 2015. I 2017 vedtok den internasjonale maritime organisasjonen (IMO) kravet om Maritime Cyber risikostyring (datasikkerhet). Datasikkerhet skal nå være en integrert del av rederiets risikostyring for å håndtere risikoen for sine skip. Fra og med 2021 er kravet at håndtering av cyberrisikoer er innarbeidet i rederiers sikkerhetsstyringssystem.

Kurset tar for seg ISM kodens oppbygning og krav satt i koden. Samt hvordan selskapet (rederi) delegerer, og hvordan de involverte ivaretar sine oppgaver og plikter.

Kursdeltagerne skal etter gjennomført kurs forstå bakgrunn og formål med ISM koden. Selskapet sitt ansvar, samt være i stand til å bidra med å gjennomføre, evaluere og kontinuerlig forbedre et selskap sitt styringssystem.

This course is only available in Norwegian.

Who is this course for?

Personnel requiring awareness or understanding of turbo expanders.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course provides an overview of the principles of turbo expansion.

How will this course benefit my company?

By ensuring you have an overview of the principles of turbo expansion.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Grunnleggende opplæring i arbeidsmiljø og HMS for verneombud, medlemmer av AMU (arbeidsmiljøutvalget), ledere, arbeidsledere og tillitsvalgte. Kurset tilfredsstiller kravene i AML § 6-5 til opplæring av verneombud.

Kursinnhold
- Arbeid med og innføring i Arbeidsmiljøloven
- Hovedprinsipper i helse-, miljø- og sikkerhetsarbeid
- AMU
- HMS system (internkontroll)
- Arbeidsgivers og arbeidstakers plikter
- Psykososialt arbeidsmiljø
- Fysisk arbeidsmiljø
- Sykefravær og arbeidsmiljø
- AKAN
- Inkluderende arbeidsliv
- Varsling

This course is only available in Norwegian.

Course Goal: This course aims to provide an overview of seawater systems.

Who is this course for?

Trainee Oil and Gas Operations Technicians.

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role.

How will this course benefit me?

This course aims to provide an overview of seawater systems.

How will this course benefit my company?

To ensure you have an overview of seawater systems.

What standards are referred to in this course?

This course is made according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Provided in association with Astutis, approved centre 1857.

IOSH Managing Safely is a basic risk management health and safety certificate which will offer managers an understanding of the practical actions needed for the health and safety of their teams.

It enables organizations to demonstrate a commitment to health and safety standards by ensuring managers and supervisors are aware of their responsibilities and the positive actions they can take to ensure a safe a healthy working environment.

On completion of the course, learners will be able to:

• Understand your responsibilities for safety in the workplace.

• Recognise common workplace hazards and implement appropriate control measures.

• Estimate, evaluate and reduce risk by applying a hierarchy of risk control.

• Undertake structured risk assessments and accident investigations.

• Understand the requirements of HSE legislation.

• Recognise different ways to measure and improve health and safety performance.

Course goal: This course aims to increase learners’ awareness of the risks, and consequences, of slips, trips and falls in the workplace and the control measures and steps that can be taken to reduce the risk of slips, trips and falls, based on industry best practice.

Target Audience: All onshore and offshore personnel

Learning Objectives

LO1 Outline the extent of the problem of slips, trips and falls at work

LO2 Identify the causes of slips, trips and falls

LO3 Describe the importance of following regulatory requirements to help reduce the risk of slips, trips and falls occurring

LO4 Explain the duties of employers in preventing slips, trips and falls in the workplace

LO5 Explain the hierarchy of controls in preventing, and reducing, the risk of slips

LO6 Explain the actions that can be taken to prevent and reduce the risk of trips

LO7 Explain the responsibilities of employees in preventing slips, trips and falls

Who is the course for?

Personnel who require an overview of the steps involved in the process of disconnecting flowlines.

Is previous experience required?

You do not require previous experience to complete this course.

How will the course benefit me?

By providing you with an overview of the steps involved in the process and disconnecting flowlines and the associated safety controls.

How will the course benefit my company?

By ensuring personnel are aware of the hazards posed by disconnecting flowlines and the steps that should be followed to ensure that the work is carried out safely.

What standards are referenced in the course?

This course does not refer to specific legislation or standards.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Personnel requiring an awareness or understanding of US fire extinguishers.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to ensure that relevant personnel in the US have a common and consistent understanding of portable fire extinguishers.

How will this course benefit my company?

By ensuring you have a common and consistent approach to company and industry best practice in relation to US portable fire extinguishers.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is the course for?

Personnel requiring an awareness or understanding of lubrication systems.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will the course benefit me?

This course aims to introduce learners to the role of lubrication systems in maintaining mechanical equipment.

How will the course benefit my company?

By ensuring you are introduced to the role of lubrication systems in maintaining mechanical equipment.

What standards are referenced in the course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

The goal of this course is that all personnel who use hazardous work equipment, will gain good knowledge of HSE when using work equipment. The course deals with personnel requirements, roles and responsibilities, as well as accidents and regulations on safety.

In addition, the course requires that practical training is conducted on applicable work equipment.

The course covers the following topics:

• Work equipment in general
• Use of work equipment
• Selection of work equipment
• Training in the use of work equipment
• Workspaces and personnel requirements
• Risk assessment
• Safety, accidents and liability
• Direct and underlying causes of accidents
• Relevant laws and regulations

The course includes exercises, and final test with 30 questions.

Hensikten med kurset er å gi opplæring av riktig og sikker bruk av fallsikringsutstyr og bruk av redningsutstyr. Kurset gir kandidaten opplæring i hvordan de skal gjøre seg kjent med vedlikeholdsrutiner og produsentens bruksanvisning slik at fallsikrings- og redningsutstyr brukes på en riktig og sikker måte.

Leksjon 1 i Mod. O-2.2 og siste punkt i leksjon 2 i Mod. O-3.2

Kursinnhold
- Innledning
- Regelverk, standarder og retningslinjer
- Risikovurdering og risikohåndtering
- Konsekvenser av et fall i fallsikringsutstyr
- Kjennskap og ferdigheter til relevante typer fallsikringssystem, utstyr og metoder
- Krav til vedlikehold, oppbevaring og kontroll
- Skriftlig prøve

This course is only available in Norwegian.

Kursene omfatter opplæring i sikker bruk av redningsutstyr, planlegging, organisering og risikovurdering av redningsaksjoner, samt førstehjelp ved hengetraume. Kursene innehar realistiske øvelser i hvordan det utøves redning av personer på en mest mulig effektiv og forsvarlig måte ved bruk av redningsutstyr.

Regelverksreferanse:

NOG Kursplan taubasert fallredning

Kursene omfatter opplæring i sikker bruk av redningsutstyr, planlegging, organisering og risikovurdering av redningsaksjoner, samt førstehjelp ved hengetraume. Kursene innehar realistiske øvelser i hvordan det utøves redning av personer på en mest mulig effektiv og forsvarlig måte ved bruk av redningsutstyr.

Regelverksreferanse:

NOG Fagplan fallredning (og repetisjon)

It has become increasingly clear that social media is not just a fad. It is instead, not only a massive change in the way we socialize with others in a personal setting, but also the biggest shift in how we conduct business since the arrival of the Internet. Social media is quickly altering every aspect of corporate operations, such as hiring practices, training, marketing, and even risk management.   The purpose of this course is to introduce you to social media, explore how we use social media personally vs. social media use in a business setting, how its use continues to evolve in the workplace, the benefits of social media, and of course the risks it can present to you personally and to companies.

Kursinnhold:

Modul O-2.6

- 6 timer teori

- 13 timer praksis

- 5 timer Eksamen/evaluering

Følgende blir bl.a gjennomgått:

Teori:

- Årsaker til uønskede hendelser

- Avviksrapportering

- Risikovurdering og risikostyring

- Barrierer

- Arbeidsmiljøloven

- Vegtrafikkloven

- Forskrift om Bruk av kjøretøy

- Norsk olje og gass - retningslinje 116

- Bruk av personlig verneutstyr

- Ulike typer lastbærere, konstruksjon, funksjon og virkemåte

- Valg av lastbærere

- Brukerkontroll av lastebærere, kriterier for bruk

- Planlegging av innlastning

- Festepunkter i lastebærere

- Krefter man sikrer lasten for

- Teoretisk eksamen

Praksis:

- Korrekt bruk av personlig verneutstyr

- Egen og andres sikkerhet

- Typeopplæring på truck, inkl. relevant tilleggsutstyr

- Gjennomføre brukerkontroll av lastebærere

- Sikring av last til paller

- Planlegge innlasting og sikring av ulike typer last i ulike typer lastbærere,

   inkl. bil/transportflak/tralle

- Funksjon av lastsikringsutstyr, som fiber og kjetting

- Bruk av lastsikringsutstyr, barriere og avstemplingsmateriell

- Kontroll av lastsikringsutstyr

- Gjennomføre innlasting og lastsikring av ulike typer last i forskjellige        lastbærere

- Bruk av ulike hjelpeverktøy

- Praktisk eksamen

Eksamen/Evaluering:

- Avsluttende prøver gjennomføres selvstendig og uten hjelpemidler.

Hensikten med kurset er å gi blivende kranførere god teoretisk og praktisk grunnopplæring på fastmonterte hydrauliske kraner. Kurset gir elevene god innsikt i prinsippene for kranens konstruksjon og virkemåte. Etter endt kurs med bestått teoretisk prøve vil denne sammen med bestått praktisk kjøreprøve være grunnlaget for utstedelse av kranførerbevis G20 Fastmontert hydrauliske kraner.

Opplæringen dekker kompetansekrav i NORSOK standard R003N for Kranfører G20. 

Kursinnhold
- G11 stroppekurs (se KOL-001)
- Innledning
- Konstruksjon
- Hydraulikk
- Mekanikk
- Lover / forskrifter / standarder
- Ståltau / vinsj / blokker
- Dokumentasjon
- Sikkerhetsbestemmelser
- Løfteredskap
- Øvingsoppgaver
- Eksamen

Who is this course for?

Personnel in oil and gas operations or technical roles.

Is previous experience required?

It is recommended you have completed the principles of well control course prior to undertaking this course.

How will this course benefit me?

This course aims to provide an overview of snubbing.

How will this course benefit my company?

By ensuring your personnel have an overview of snubbing operations.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Presentation 

This training course provides a general introduction to dynamic positioning systems, which are computer-controlled systems that automatically maintain the vessel's position and heading by using their propellers and thrusters. 

Objectives 

On completion of the training, students will be able to: 

Get familiar with dynamic positioning systems. 

Know the main components of dynamic positioning systems, equipment used and installation. 

Know the Class requirements in terms of surveys and tests of dynamic positioning systems 

Program 

History 

Characteristics and scope of DP systems 

Applications 

Equipment class 

Classification notations 

System configuration: power system, thruster system, control system, position reference systems, computer system, display system 

Redundancy 

o Redundant systems 

o System failures 

o Redundancy concept 

o Terms 

o Single fault tolerance 

o FMEA 

Design environment 

Essential non-DP systems 

Performance analysis 

Operational requirements 

System components 

o Power system 

o Thruster system 

o DP control system 

o Position reference system: acoustical, taut-wire and other reference systems 

Scope of DP surveys 

o Inspections at works 

o Surveys during construction, tests and trials 

o Surveys during operation: Annual and Renewal surveys, operational test, Occasional surveys

Certificate 

On completion of the training program, the student will be awarded the following qualifications:

Certificate of Introduction to DP System awarded by Bureau Veritas Solutions Marine & Offshore.

The Certificate of Introduction to DP System, issued by Bureau Veritas Solutions Marine & Offshore, is obtained after completing the course and passing the qualification examination.