Course catalogue

Oppgradering fra Norsk Olje og Gass til IMO50 for personell som innehar Grunnleggende sikkerhetskurs for Norsk Olje og Gass (Offshore).

Kurset oppgrader personell med Grunnleggende sikkerhetskurs for Norsk Olje og Gass (Offshore) til STCW Grunnleggende sikkerhetsopplæring for sjøfolk. Kurset inneholder brannvern, røykdykking, brannslokking, sjøredning, grunnleggende førstehjelp og personlig sikkerhet og omsorg for menneskeliv og miljø. Kurset er godkjent etter IMO regelverket og gjelder hele verden.

Objective: The main goal is to provide personnel who are to perform the roles of signal transmitter, signalers and deck operator with sufficient knowledge of handling and transport of dangerous goods and hazardous waste, to be able to identify hazards and risks when handling this type of cargo, in such a way that unwanted incidents are avoided.

Safe handling and transport of dangerous goods and hazardous waste requires knowledge of hazards and risks, regulations, correct execution and safe practice during treatment and transport.

Content:

The learning process leading up to a certificate of competence is carried out to contribute to safe lifting operations, as well as to document the necessary knowledge and skills in accordance with requirements laid down in national regulations and standards.

After completion, participants must be able to identify hazards, risks, causes and consequences of accidents with dangerous goods and hazardous waste.

Participants will also be familiar with restrictions, requirements, classifications, identification, packaging, marking, documentation and handling of dangerous goods and waste.

Objective: Through a combination of theory and practical training, this course provides participants with the necessary knowledge and skills required to work safely in enclosed spaces.

The Norwegian Labor Inspection Authority has made major changes to the regulations. People who work in tanks and closed rooms are the biggest difference that the regulation "Work in tanks" has fallen away. This is replaced by section 29 of the regulations «execution of work», which states that all work in closed rooms shall be performed «without danger to life or health». A simple requirement that gives the employer a great deal of responsibility.

New SOLAS requirements: Exercises in closed rooms and rescue, as well as portable gas measuring equipment.

Applies to: All ships covered by SOLAS and all high-speed vessels, mobile offshore drilling units and dynamically positioned vessels

Our courses are in accordance with SOLAS-IMO requirements and the Norwegian Labor Inspection Authority - Execution of work

The definitions of a cramped space vary from country to country, but the usual criteria usually include:

- A room that is predominantly or completely closed
- Contains health and / or safety hazards
- Is not designed for continuous stay of employees
- Has entrances or exits that are small or difficult to access
- A room that is large enough that you can enter it completely and perform the work tasks you have been assigned
- Limited air circulation

Content:

- Review of public laws and regulations
- Know which constituents a safe breathing air contains
- How to make a gas measurement before entering
- Plan entry jobs and rescue operations in closed rooms
- Equipment knowledge
- Exercises in our training tank. We practice entry and use of fall protection equipment, rescue equipment, breathing air equipment and gas meter

Only in Norwegian

Kurset dokumenterer at skipsoffiserer (dekk og maskin) har gjennomført godkjent oppdateringskurs (IMO80) minst hvert femte år.

Deltakerne skal etter endt kurs kunne

- Ta kommandoen over en redningsfarkost eller mann-overbord-båt under og etter utsetting (Tabell VI/2-1) 
- Lede brannslokningsoperasjoner om bord på skip (Tabell VI/3) 
- Gi førstehjelp omgående i tilfelle av ulykke eller sykdom om bord (Tabell VI/4-1) 
- Gi medisinsk behandling av syke og skadde mens de er om bord. Delta i samordnede opplegg for medisinsk bistand til skip (Tabell VI/4-2)

Kursinnhold
- Medisinsk førstehjelp for maskinoffiserer
- Medisinsk behandling for dekksoffiserer
- Ledelse av brannslokking
- Bruk av redningsfarkoster

Praktiske øvelser

- Dag 1: Medisinsk behandling for dekksoffiserer

- Dag 1: Medisinsk førstehjelp for maskinoffiserer
- Dag 2: Brannledelsesteori, brannøvelser og røykdykking med pressluftapparater
- Dag 3: Redningsteori og mønstring og redningsøvelser med redningsfarkoster

Grunnleggende teoretisk og generell sikkerhetsopplæring i trykktesting iht. Forskrift om utførelse av arbeid best. 703.

Kursinnhold

- Trykk og testmedier

- Materiallære

- Bolter og skruer

- Kontroll og vedlikehold

- Gjenger og koblinger

- Sikkerhet

- Høytrykkspumper og boosterpumper

- Slanger

- Valg av testutstyr

- Prosedyrer

- Måleenheter/tabeller

- Arbeidsmiljø

- Avsluttende teoretisk prøve

Focus on production and processing. Upon completion of this course, participants should be able to give an account of the production process of oil and gas. They should be able to identify platform equipment, state the position, and, in principle, give an account of the workings of the production and process equipment involved.

Course Content 

Introduction:

What is produced?

- Liquids

- Gases

The production well:

The Christmas tree

The production process, main and auxiliary equipment

- Well head

- Production manifold

- Inlet separator/water separator

- De-gassing tanks

- Liquid separators

- Suction brushes

- Gas Brushes

- Compressors

- Coalescer

- Flare boom - Coolers/heat exchangers

- Pumps

- Filters

- Valves

The production process, main and auxiliary equipment, cont.:

- Measuring apparatus

- Water machines - electric boilers

- Gas treatment equipment

- Separators for gas/condensate

- Storage tanks and equipment

- Re-injection manifold

- Safety and surveillance systems

- Help systems

Production methods:

- Primary extraction

- Secondary extraction (gas/water injection)

Future production systems:

- Underwater/satellite system

The course can also be arranged internally and can be tailor-made for individual companies.

Only in Norwegian

Kurset gir kursdeltakerne kunnskap om ARL's funksjon og rolle, effektiv kommunikasjon, innholdet i situasjonsrapporter og observasjonsteknikker. Deltakerne lærer også hvordan man slokker mindre branntilløp, samt å utføre livreddende førstehjelp.

Kurset er i hovedsak basert på praktiske øvelser i slukking av brann, bruk av utstyr, slukkemetoder og førstehjelp.

Kursinnhold

Brann:
- Funksjon og rolle 
- Observasjonsteknikk 
- Kommunikasjon 
- Situasjonsrapport
- Slokking av branntilløp med håndslokkemateriell 
- Barrierer (tekniske, menneskelige og organisatoriske)

Førstehjelp:
- Sirkulasjon / blødninger 
- Hjerte- og lungeredning 
- Brannskader 
- Stans av blødninger
- Hode-, nakke- og ryggskader 
- Transport av skadde 
- Førstehjelp, nye momenter

Etter endt undervisning skal kursdeltakerne:
- Kjenne til ARL's funksjon og rolle
- Kunne etablere effektiv kommunikasjon 
- Kjenne til innholdet i en situasjonsrapport 
- Effektivt kunne slokke et mindre branntilløp med en håndslokkemateriell 
- Kjenne til observasjonsteknikker 
- Kunne utføre livreddende førstehjelp

Coaching is a process, which the leaders use to help employees become more independent. There are many coaching programs available to managers these days. But the good leaders implement The COACH Model in coordination with a coaching philosophy that includes mentoring, constant two-way communication, and continuous feedback. The COACH Model is a five-step program that walks a leader through the process of coaching an associate from setting a goal to measuring their success at the end of the process. 

• Describe the effectiveness of the COACH Model 

• Explain the need to clarify goals 

• Identify obstacles and explore alternatives through brainstorming 

• Choose an action and hold the accountability

Executive presence isn’t something you’re born with, it’s a combination of learned behaviors and characteristics that can be developed. Depending upon your personality, industry, business goals and challenges, executive presence can be manifested in different ways. 

Having great presentation skills and making a strong first impression based on your clothing and demeanor is not executive presence. You need more substantive abilities to face daily business challenges, speak your mind while maintaining your composure, or inspire your team to commit to a demanding new goal. Executive presence is a purposefully developed hybrid of internal character and external presentation. Let’s look at the qualities that distinguish great leaders from mediocre ones.

• Identify the attributes of executive presence

• Gauge your executive presence and gain insight

• Receive feedback in different forms

• Develop your own executive presence

After completing the course, the students should be able to take part in their own organisation’s emergency management and be familiar with emergency preparedness in the petroleum industry.

Course Content

Lectures and simulation/practical exercises and drills within:

- Emergency preparedness organisation

- Efficient management of an emergency situation

- Cooperation – roles and responsibilities

- Mental reactions and stress management

- Emergency room conduct – practical training

This course is valid for 24 months.

In this lesson, you will learn how a culture of learning leads to success. Establishing a culture of continuous learning in your organization takes time and effort, but the results are worth the investment.    

Begin with gaining the support of executives, and then start to incorporate learning into your overall mission, your strategic goals, and value statements.   

Work to get “buy-in” from everyone in your company, and include them in finding ways to learn, teach, and share knowledge.   

Establish easy-to-use systems and processes that make learning an expected part of your corporate behavior.    

Your organization and employees will benefit not only through increased productivity and higher profits, but in personal development and job satisfaction as well. 

• Describe a continuous learning organization     

• List the benefits of a continuous learning organization    

• Build a culture of continuous learning

Presentation

This training course provides a general introduction to materials and their basic properties. It includes an overview of metallic and non-metallic materials used in modern shipbuilding.

Objectives

On completion of the training, students will be able to:

Understand the importance of materials’ properties for shipbuilding, know the basic mechanical properties of materials and the testing procedures, be familiar with the concept of tribology, and know the two most common types of wear.

Know the main groups of steels used in shipbuilding, their main properties and places of application, and understand the difference between steel and cast iron.

Know the composition, properties and places of application of aluminium and copper alloys in shipbuilding.

Get familiar with the synthesis, structure and properties of polymers; know the most common types of polymers used and their place of application.

Understand the role of matrix and reinforcement phase in the structure of composites and know the fabrication methods of composite parts.

Program

Module 1 - Basic Material Properties

History

Structural components and materials of modern vessels

Basic material properties

Mechanical properties of materials
o Tensile test
o Toughness
o Fatigue
o Creep
o Hardness

Tribological properties of materials
o Friction
o Wear

Module 2 - Metallic Materials used in Shipbuilding

Classification of metallic materials

Steels
o Normal strength steels
o Higher-strength steels
o Steels for boilers and pressure vessels
o Ferritic steels for low-temperature service
o Stainless steels
o Steel forgings
o Steel castings

Cast iron

Aluminium and its alloys
o Classification
o Heat treatment
o Wrought aluminium alloys
o Cast aluminium alloys

Copper and its alloys
o Classification
o Brass (Copper-Zinc alloys)
o Bronzes
o Copper-Nickel alloys

Module 3 - Plastic and Composites used in Shipbuilding

Polymers (plastics)
o Classification
o Application in marine engineering

Composites
o Composition
o Classification
o Polymer matrix composites
o Processing of fibre-reinforced composites
o Structural composites

Certificate

On completion of the training program, the student will be awarded:

A Certificate of Materials in Shipbuilding, issued by Bureau Veritas Solutions Marine & Offshore.

The Certificate of Materials in Shipbuilding is obtained after completion of the course and passing the online test.

First and most importantly, it is the just and moral course of action. Centuries of exploitation, oppression, and disenfranchisement of the Black community has resulted in predominantly white leadership in most organizations. Companies must intentionally disrupt the systemic barriers in place that maintain the biased (prejudiced, race-based) status quo in order to create more inclusive and sustainable organizations that better serve the community.

• Why should companies invest in Black talent?

• How do companies identify and attract Black talent?

• How do companies develop and retain Black talent?

When writing business emails, letters, memos, and other communications, it’s important to check for any grammar or spelling errors that can distract from your message. Misspelled words and grammatical errors are easy to fix if you make a habit of using the spellcheck and grammar features on your computer. In this course, we will review basic punctuation rules. We will examine some common sentence structure mistakes. And we’ll study some common word choice errors. Finally, we’ll provide a list of online resources and books. Don’t let grammar and word choice errors blur your message or damage your credibility.

• Use appropriate punctuations    

• Improve your sentence structure    

• Identify the common mistakes in word usage

Presentation 

This training course provides a general introduction to Naval Architecture, the art and science of building ships. 

Objectives

On completion of the training, students will be able to: 

Understand the ship design process and the main terms and definitions used, including the lines plan, the form coefficients used in ship design, and the area and volume properties. 

Know the basic concepts of intact and damage stability. 

Get familiar with the main aspects of marine hydrodynamics acting on ship resistance, propulsion and seakeeping. 

Understand the basic principles of ship structures, structural design, scantling determination and typical structural arrangements of different ship types. 

Know the most common failure modes and structural defects. 

Get familiar with shipbuilding technology processes, materials used and shipyard layout 

Program 

Module 1 – Ship Geometry

Module 2 – Ship Stability and Trim

Module 3 – Damage Stability

Module 4 - Load Lines

Module 5 – Ship Resistance, Propulsion and Seakeeping

Module 6 – Introduction to Ship Structures

Module 7 – Structural Arrangement of Different Ship Types

Module 8 – Structural Design, Analysis and Classification Rules

Module 9 – Failure Modes and Structural Defects

Module 10 – Introduction to Shipbuilding

Certificate 

On completion of the training program, the student will be awarded the following qualifications:

Certificate of Introduction to Naval Architecture awarded by Bureau Veritas Solutions Marine & Offshore.

The Certificate of Introduction to Naval Architecture, issued by Bureau Veritas Solutions Marine & Offshore, is obtained after completing the course and passing the qualification examination.

One of the key responsibilities of a leader is to assess team members on a regular basis. These might include post-project reviews, annual or quarterly performance evaluations, and in-the-moment feedback.  

Organizations use different parameters and tools to assess their employees. The assessments used are based on functional goals, developmental goals, innovation goals, stretch goals, or any other goals customized to the organizational needs. Irrespective of the tools you use, when it is time to assess your employees, do you rely on the data or by your perception of the person?  

As fair and factual as you believe your assessments are, you might actually be guilty of some “rater biases” that can skew your evaluations. 

• Assess if you are too lenient or halo in your evaluations 

• Find whether your evaluations are based on recency or similarity 

• Examine if you are driven by contrast or negative bias 

• Identify the central tendency and employ a technique to be objective during your evaluations

People generally do business with people they like or look up to, and not just with a company. This means that successful leaders build their personal brand, resulting in the achievement of organizational goals. A personal brand can elevate you above the crowd and help you achieve your personal and professional goals. It is a constant and ever-changing process of identifying your goals, setting up a plan, and monitoring it consistently. Your brand is a combination of the skills you develop and the behavior you display. In this course, you will look at the traits of building a successful personal brand.

• Define personal brand

• Enlist strategy to build a personal brand

• State the steps to build a successful personal brand

McKinsey’s 7-S model was created by McKinsey consultants Robert Waterman, Tom Peters, Richard Pascale, and Anthony Athos. It provides a framework to plan and execute mid-term organizational change. It is based on the premise that organizations perform properly when seven key elements are aligned. 

The seven key elements are structure, strategy, systems, skills, style, staff, and shared values. The model is most often used as an organizational analysis tool to assess and monitor changes in the internal situation of an organization.

• List the seven elements of McKinsey’s change model 

• Identify the hard and soft elements of the factors of change 

• Use the model to change organizational behavior 

• State the advantages and disadvantages of the model

Whether you’re publicly challenging long-held beliefs or experimenting with a new idea, it’s normal to experience fear or discomfort. You can reduce these emotions by creating a workplace that openly promotes change, welcomes honest and productive discussions, sees failure as a necessary part of business success, and rewards and supports risk taking on a daily basis. It may seem ironic, but when you instill a continuous learning culture and growth mindset in your organization, failure can actually lead to success.

• Identify methods to challenge the status quo   

• Identify reasons for bias towards encouraging smart failure and suggest solutions    

• Enlist ways of encouraging learn from failure culture